Speaker
Description
Currently, the majority of fertilizers rely on ammonia (NH${_3}$), predominantly produced by the Haber-Bosch process. Compared to this process, nitrogen fixation by plasma directly from air offers several fundamental advantages, e.g. it can be instantly switched on and off, making it ideal for utilizing intermittent "green" energy from wind or solar sources. The first step in this process is the formation of nitrogen oxides or acids in the gas phase. Next, these species must be captured in the water in the form of nitrates (NO${_3}^-$), nitrites (NO${_2}^-$). From this point of view, it is preferable to convert weakly soluble NO and NO${_2}$, primary gas phase products in the N-fixation process, into more soluble species such as HNO${_2}$, $\mathrm{N}{_2}\mathrm{O}{_5}$, or HNO${_3}$.
Relatively high concentrations of HNO${_2}$ (up to ~100 ppm) can be generated by transient spark (TS) discharge in humid air [1]. When the TS-treated humid air (1 slm) is bubbled through 2 ml of water, HNO${_2}$ is easily solvated, and NO${_2}^-$ concentration in the water reaches ~5 mM within 10 minutes.
HNO${_2}$ is probably mainly produced by a ternary reaction of NO with the OH radical. The production of HNO${_2}$ saturates already at a relative humidity around 30-40%. This indicates that the amount of water molecules does not limit the HNO${_2}$ formation. As a result, HNO${_2}$ concentration is proportional to the NO concentration, and both concentrations increase linearly with specific input energy. The efficiency of HNO${_2}$ formation is probably limited by its backward decomposition to NO, or by reactions with OH, H, and O radicals. In the gas phase, the majority (~80-90%) of N fixated from the air remains in the form of weakly soluble NO.
For this reason, we altered the gas-phase chemistry by adding H${_2}$O${_2}$ to the gas inlet by bubbling a part of synthetic air (10-90%) through 50% H${_2}$O${_2}$ solution. The H${_2}$O${_2}$-enriched gas was also TS-treated and bubbled through the water afterward. We found that H${_2}$O${_2}$ in the gas phase negatively influences the HNO${_2}$ formation. However, the overall N-fixation efficiency from air into water increased, with the dominant product being NO${_3}^-$. Its concentration reaches ~7 mM after 10 minutes of bubbling the TS-treated gas through 2 ml of water.
Surprisingly, the concentration of H${_2}$O${_2}$ in the water enriched by NO${_3}^-$ was very low. It could be theoretically consumed via reactions with NO${_2}^-$ in the liquid phase. However, this reaction is relatively slow at a given pH (4-5), and the lifetime of NO${_2}^-$ under these conditions is on the order of tens of minutes. Moreover, with less HNO${_2}$ in the gas phase, less NO${_2}^-$ can be generated in the water, and the majority of NO${_3}^-$ is probably not formed from solvation of other species, such as HNO${_3}$ or N${_2}$O${_5}$. Further research is needed to specify processes leading to NO${_3}^-$ formation in the water. In addition to chemical kinetic modeling, we plan to study treated gas composition by FT-IR spectroscopy. Until now, we have used UV-Vis absorption spectroscopy, suitable only for NO, NO${_2}$, and HNO${_2}$, not for HNO${_3}$ or N${_2}$O${_5}$.
This work was supported by grant agency VEGA under the Ministry of Education, Research, Development and Youth of the Slovak Republic, project No. 1/0173/26, and Slovak Research and Development Agency, project. No. APVV-22-0247.
References
[1] M. Janda et al., Appl. Sci., 11, 7053 (2021).